TRIUMPH DAYTONA 650

 

The Daytona name is stuff of racing legend for Triumph Motorcycles and never used lightly. An evolution of the Daytona 600, a machine that’s proved itself in both short circuit and real-roads riding, the Daytona 650 is a pure supersports machine. It features a race-bred chassis offering direct, uncut connectivity with the tarmac matched to an engine spinning out a maelstrom of power and torque.  

Never content with resting on their laurels the Daytona’s liquid-cooled, fuel-injected, DOHC, sixteen-valve, inline four-cylinder motor has been extensively worked over by Triumph’s engineers. The engine’s stroke has increased 3.1mm to 44.5mm and boosting the engine’s capacity 47cc to 646cc has seen the Daytona 650’s surge of top-end power bolstered with a great gobbet of mid-range torque. The result is an engine that works effortlessly on the road and addictively on the racetrack.  

No matter the situation the Daytona 650 rewards its rider with instant acceleration and lightning-fast throttle response throughout the rev range. Peak power of 114PS arrives at 12,500rpm, with a peak torque figure of 68Nm at 11,500rpm. Power delivery, thanks to a new EFI tune, is significantly improved throughout.  Further refining the engine is a clutch fitted with a backlash eliminator gear while the slick-changing six-speed gearbox has been enhanced with a remote linkage. A redesigned seven-plate clutch (down two plates) balances the extra weight of the backlash gear. 

Universally praised as being one of the best handling middleweights around, the Daytona 650’s aluminium, twin spar frame uses a three-cell construction and is both incredibly light and strong. Rake and trail are a lightning-sharp 24.6°/89.1mm, wheelbase a diminutive 1390mm. Dry weight is a competitive 165kg. 

The front 43mm cartridge forks use single-rate springs. All fork internals – rods, cartridges and fixings – are made from aluminium and the forks are adjustable for spring preload, compression and rebound damping. The remote-reservoir rear shock is also adjustable for spring preload, compression and rebound damping. Twin four-piston calipers operate on the front 308mm discs, one single-piston caliper the rear 220mm disc. Lightweight three spoke wheels are cast in aluminium. Tyres sizes are front, 120/70 ZR17, rear 180/55 ZR17. 

Many motorcyclists seek a hard-edged track-focused machine either as a first or second bike, but really don’t want to own ‘just’ another run of the mill machine. Impressed with the need for individuality Triumph has ensured that the Daytona 650 is a machine that not only looks very different, with its distinct and seductive lines, but is also built with a level of care and attention to detail that ensures a great deal of owner satisfaction.  

Available in two paint options, Racing Yellow and Tornado Red, a seat cowl is supplied as original equipment with every Daytona 650, as is a colour matched rear hugger. New for 2005 is the black-finished aluminium silencer. 

The Daytona 650 blends technology, know-how, performance, ability and sheer beauty in one very compact and useable package. It’s a focused, sharp-edged machine with the added dimension of real-world real-roads usability and comfort, the benchmark of Triumph’s philosophy.  

You can have it all – the Daytona 650 proves that.

 

Specification changes for 2005:  

-          Refined, larger capacity (646cc) engine

-          Remote gear linkage

-          Black silencer finish

 

Triumph accessories available:

-          Alarm / Immobiliser

-          Carbon Silencer (for off road use only)

-          Stainless Steel Silencer (for off road use only)

-          Aero Screen

-          Tank Bag

-          Throwover Panniers

-          Gel Seat – Rider

-          Gel Seat – Pillion

-          34PS Restrictor Kit

 

 


Shop our online store TRIUMPHeSTORE.com

Hermy's is a Triumph Triple Connection Stocking Dealer


Click on images for
 full size pictures


 

Specification
 

Specification

ENGINE

Type

 

Liquid-cooled, DOHC, in-line 4-cylinder

Capacity

 

646cc

Bore/Stroke

 

68 x 44.5mm

Compression Ratio

 

12.85:1

Fuel System

 

Twin-butterfly, multipoint sequential electronic fuel injection with forced air induction

Ignition

 

Digital – inductive type – via electronic engine management system

TRANSMISSION

Primary Drive

 

Gear

Final Drive

 

X ring chain

Clutch

 

Wet, multi-plate

Gearbox

 

6-speed

CYCLE PARTS

Frame

 

Aluminium beam perimeter

Swingarm

 

Twin-sided, aluminium alloy

Wheels

Front

Alloy 3-spoke, 17 x 3.5in

 

Rear

Alloy 3-spoke, 17 x 5.5in

Tyres

Front

120/70 ZR 17

 

Rear

180/55 ZR 17

Suspension

Front

43mm forks with adjustable preload, rebound and compression

 

Rear

Monoshock with adjustable preload, rebound and compression damping

Brakes

Front

Twin 308mm floating discs, 4 piston calipers

 

Rear

Single 220mm disc, single piston caliper

DIMENSIONS

Length

 

2112mm (83.1in)

Width (Handlebars)

 

712mm (28.0in)

Height

 

1131mm (44.5in)

Seat Height

 

815mm (32.1in)

Wheelbase

 

1390mm (54.7in)

Rake/Trail

 

24.6º/89.1mm

Weight (Dry)

 

165kg (363lbs)

Fuel Tank Capacity

 

18 litres (4.7 gal US)

PERFORMANCE

(MEASURED AT CRANKSHAFT TO DIN 70020)

Maximum Power

 

114PS (112bhp) at 12,500 rpm

Maximum Torque

 

68Nm (51ft.lbf) at 11,500 rpm

COLOURS

 

Tornado Red, Racing Yellow

Two Year Unlimited Mileage Warranty

Riders Association Triumph Membership Included

Visit our local RAT Pack Web Site: RoyalRATPack.Com


BMW Motorcycles ||| Classic British ||| Triumph Motorcycles

In Stock BMW Motorcycles ||| In Stock Triumph Motorcycles

BMW Financing ||| Online Riders ||| Triumph Financing

Back to the Top ||| Pre-Owned Cycles For Sale ||| FrontPage

MotorcycleStore


©1997-2013 Hermy's Tire & Cycle, Inc.
69 Centre Street, Route 61
Port Clinton, PA 19549
-0065 

+1(610) 562.7303 (voice) 
+1(610) 562.5481 (24 hour fax)
 
Amex - Visa - MasterCard - Discover - PayPal 

Hours & Location

E-Mail